1).Silicon Rubber for sheds/housing 2).Glass-fiber reinforced epoxy resin rod(ECR type)for core 3).Hop dip galvanized cast steel for metal fittings 4).IEC standard. 5).ISO9001 and ISO14001 manufacturer.

1).Silicon Rubber for sheds/housing 2).Glass-fiber reinforced epoxy resin rod(ECR type)for core 3).Hop dip galvanized cast steel for metal fittings 4).IEC standard. 5).ISO9001 and ISO14001 manufacturer.

1).Silicon Rubber for sheds/housing 2).Glass-fiber reinforced epoxy resin rod(ECR type)for core 3).Hop dip galvanized cast steel for metal fittings 4).IEC standard. 5).ISO9001 and ISO14001 manufacturer.

1).Silicon Rubber for sheds/housing 2).Glass-fiber reinforced epoxy resin rod(ECR type)for core 3).Hop dip galvanized cast steel for metal fittings 4).IEC standard. 5).ISO9001 and ISO14001 manufacturer.

supply, design and bulid production line

LOW-VOLTAGE H-FRAME CLOSURE COMPRESS GEL CLOSURE OVER H-FRAME CONNECTOR Banner    Product Description       BONLE gel H-frame closure provides a fast and simple method for insulating and environmentally sealing low-voltage cable taps and splices made with H-frame compression connectors. Simply place the connection on the closure and press the closure together. It's that easy-no tapes, mastics, tools, or mixing are required. The closure can be easily installed with one hand, even while wearing high voltage gloves. The closure utilizes BONLE's innovative sealing gel to protect the connection from moisture ingress, corrosion, and pollution. BONLE's pre-cured polymer gels are blended together and crosslinked to give high elasticity, high cohesiveness, and temperature stability. They have been in use in other applications for over 10 years. BONLE's gels are ideal for sealing electrical connections from moisture, dirt and other contaminants. There is no need to apply heat or use sealants that would make re-entry difficult or impossible. When compressed, gels will coat and adhere to surfaces; they can be easily removed by pulling or peeling them off.   Technical Data       DESCRIPTION CONDUCTOR SIZE(AWG/MM²) MAIN TAP DIE EG-1 6-2 14-8 “BG” EG-2 2-2/0 14-8 “O” Product Display     Product Display     Installation     1.      Remove insulation. install connector, and clean cables.Strip main and tap cable insulation using the connector as a guide. Do not allow more than a 1/4- (6mm) of exposed conductor from edges of connector as shown. Install connector per manufacturer's instructions. Clean cables for a distance of 4" (6mm) from conductors.   2.  Place H-frame in closure Open hinged closure to expose gel being careful not to contaminate gel surfaces. Place H-frame connector in center of gel closure as shown.   3. Compress closure Compress gel closure over H-frame connector as shown making sure that both locking snaps are securely engaged. Inspect completed splice. Properly installed closure will have both snaps securely locked. Gel will be visible at both ends of closure. Product Advantage   Product Advantages      Production Process       QC Flow          Company Information           About Us     BONLE Group professionally in power electronics manufacturing and export for many years. Till now sized with 7 factories for different product series. And build a long-term and close collaborative relationship with more than 30 Chinese domestic suppliers, which assures supplying completely for the substation and transmission lines project. Below we have 3 main business channels for different cooperations 1. General order business. 2. International tenders. 3. Substation &Transmission line construction projects.   Annual output value over fifty million dollars Production Cycle 40-90 days(base of different product and order quantity.) Number of workers 1,000 workers Plant area 360,000 square meters   Qualification Certificate     Exhibition     BONLE has attend many professional electrical and power exhibitions at different countries for business development, especially our products and services have received lot of good feedbacks from customers.   FAQ      FAQ   1.Are you factory? Where is the location? Yes: Office and Factory Address is like below: 91#Taiyu Rd, Fuwan Pian, Jinshan Industrial zone, Fuzhou, PRC 350008   2.What is your main product? We are advantage in power electrical product manufacturing and exporting,have different product series in high voltage series like insulator, cutout fuse, lightning arrester etc, and some series in low voltage series like switch and socket. magmate terminal. We can accept OEM.   3.When was your company established? How many production lines do you have at present? How many employees? Our first plant founded in 1991, till now have sized with 7 factories for different product series. And we have 1500 employees (totally in all factories).   4.Where is your major customer? Our major customers are from Mid-east, South-east Asia and South America, Africa. 5.Does the product you supply have quality guarantee and certificate? Yes,the product pass standard and required testing

 1.Fast and simple method for insulating 2.Easy-no tapes, mastics, tools, or mixing are required

 1.Fast and simple method for insulating 2.Easy-no tapes, mastics, tools, or mixing are required 3.No need to apply heat or use sealants